Dental Lab Vacuum Mixer

Description

Vacuum Mixer Dental Laboratory Equipment
A safe and easy-to-use vacuum mixing device, essential in the dental laboratory. It is used in dental laboratories to achieve homogeneous bubble-free mixing of dental materials, which is more difficult manually. A dental lab vacuum mixer is an auxiliary medium that increases productivity in laboratories.

Mixing, vibrating, and the vacuum condition allow a bubble-free mixture, to improve the material’s reliability.
Its use reduces air incorporation during mixing to achieve a homogeneous mix with fewer bubbles and no lumps.
The dental lab vacuum mixer machine comes with a standard mixer cup of 300ml and 600ml cups.

Mix plaster without bubbles
Lining material
Mix alginate
silicons
Operation
Connect the air source to the air source connector after turning on the power.
Adjust the timer to set the mixing time.
Adjust the air pressure by pulling up the air pressure regulator cap, turning it clockwise to increase, and counterclockwise to decrease, until it reaches above 4 kg/cm².
Hold the bottom of the mixing cup with your hand and place the “cross” of the mixing cup chuck directly on the motor transmission connector.
Push the mixing cup upwards, turn on the power switch, and let go when the vacuum gauge pointer turns to 60cmHg.
Hold the mixing cup firmly, press the red button switch, and the mixing cup will start to rotate.
After the mixing work is completed, the vacuum mixer dental lab machine will automatically sound an alarm.
Hold the bottom of the mixing cup with your hand, turn off the power switch, and the mixing cup will be automatically separated from the machine to end the mixing work.
FAQ:
Q : Does the vacuum mixer need to be connected to an air compressor?
Yes, the vacuum mixer requires an air compressor connection to function properly.
Q : Does the vacuum mixer come with an air tube?
The vacuum mixer does not come with an air tube. However, it is compatible with other lab equipment that requires an air tube. You can set the distance between the vacuum mixer and the air compressor according to your needs.

Q : If I want to buy an air tube in my region, what is the size reference?
The size reference for the air tube is an outer diameter of 8mm and an inner diameter of 5mm.

Maintenance
1. Please use the dental lab vacuum mixer in a dry and well-ventilated environment.
2. The machine cannot be turned upside down.
3. Regularly clean the vacuum suction port sealing ring and the lid of the mixing cup to ensure a complete seal during work.
4. If it is found that the mixing cup cannot be adsorbed:
(1) Check the pressure gauge indicates whether it is above 4 kg/cm²
(2) Check if the vacuum filter is blocked.
(3) Check whether there is debris on the vacuum suction port and the sealing ring of the mixing cup, and clean is if there is any.
(4) If the fault still cannot be eliminated, please contact the dealer.
5. Filter replacement: remove the old filter and press the new filter in.

Technical
Voltage：220V/50Hz, 110V/60Hz
Power：150W
Pressure:8KG/c㎡
Dimension：27*24*47 cm
Weight：12 kg